Saturday 21 September 2019

Panoramic Wrap Round Card

I used all four of the large Panoramic aperture dies from Claritystamp to create this seamless wrap round card.
Front of card

Back of card
Score a piece of A3 white linen card at 21cm and fold in half. Trim to create a card blank 21cm x 10.8cm. Do the same to a piece of A3 black card.  Lay out the large panorama dies to create a full scene. Open out the white card blank, lay the third die just to the right of the fold and run it through a die cutting machine.
Remove the die and lay the fourth die to the right of the aperture, overlapping the left hand edge of the die with the aperture. Run through the machine again.
Repeat with the other two dies until all four have been die cut and the full scene is evident.

Add glue to the back of the die cut and glue the black card inside, lining up the edges and corners. Smooth down, fold the card in half and trim to 8” in length.

Mask off around the couple on the bench.
Using a fine brush, add metal leaf glue to the figures and bench and add variegated gold silver and copper metal flakes. Rub away the excess.
Pounce metal leaf glue onto two of the teeny weenie rabbits from the Leaf Outline stamp set, stamp the images onto the front of the card and add the same metal flakes as before. Rub away the excess.
To finish, add one of Barbara’s word stickers to the front of the card.

1 comment:

Helen said...

What a fabulous card Sarah!!